TubeSound in AUM: drive a bass sequence
Put TubeSound between a sound source and your output in AUM. Start with the bass sequence below, then try the same routing with an AUv3 instrument or another file.
Bass sequence · 118 BPM
Hear the difference
Start with the repeated low notes. Low adds harmonics above the clean bass. High makes them more prominent. Compare the same notes on headphones and on small speakers.
Selected: Dry. Press Play to listen.
- Mode
- Pro
- Starting preset
- Golden Glow
- Tube
- 12AX7
Original synthesized audio, rendered offline with TubeSound's DSP. Playback loudness is matched. High is deliberately driven harder to make the change easier to hear.
Dry MP3 · Low MP3 · High MP3. Use the WAV to try these settings in your host.
Build the signal path
Install TubeSound and open it once before returning to AUM. Add an audio channel.
- Tap the empty source slot. Load a file in File Player, or choose an AUv3 instrument.
- Tap an empty effect insert slot in the same channel. Find TubeSound in the Audio Unit effects list.
- Set the channel's output to the hardware output you use for listening.
- Start the file player or play the instrument, then open TubeSound's controls.
Source TubeSound Output
In AUM, an insert above the fader connection is pre-fader. An insert below it is post-fader. A pre-fader insert is useful here because moving the channel fader will not also change the level driving TubeSound.
Try the bass sequence
- Download the source WAV and load it in File Player. Repeat the phrase while you compare.
- Open TubeSound, choose Pro mode and load Golden Glow, which uses a 12AX7 tube model.
- For Low, set Input to 0.65. Keep the other circuit controls at the preset values.
- Use Output to match the level to the bypassed signal.
- For High, raise Input to 2.00 and match Output again. Listen for the extra harmonics above the low notes.
The source has a simple tone so the added harmonics are easier to compare. The WAV preserves the level used for the render. Your instrument may drive the circuit differently at the same Input setting.
Keep the bass in context
Higher drive adds harmonics above the fundamental. That can make a low part easier to follow on small speakers, but it also changes the tone. Listen with the kick and the rest of the arrangement before keeping it.
If the bass becomes too busy in the midrange, turn Input down. If it is louder but otherwise difficult to distinguish, match Output more carefully and compare again. Use AUM's channel fader for the part's position in the mix after you have chosen the drive.
If you hear silence or crackles
Check that the source is playing, the channel is not muted, and the output points to your headphones or interface. Bypass TubeSound to confirm the rest of the path works. Remember that the free trial includes periodic silent breaks.
For dropouts, try a larger buffer in AUM Settings > Audio Engine > Buffer Size, or reduce the number of active plug-in instances. A larger buffer adds latency, so use the smallest setting that plays your session reliably.
Host documentation
Other host guides
For the circuit controls, see the TubeSound Pro Guide.
Try it on your own track
TubeSound is free to try. The trial has periodic silent breaks. A one-time in-app purchase removes them. Use Restore Purchases if you have already bought the app.
Try TubeSound on the App Store