TubeSoundAUv3 SetupGarageBand

iPhone, iPad and Mac · Updated 10 November 2026

Tube saturation in GarageBand

Add TubeSound to a keyboard track and compare two drive settings. The example below uses a short synth-key pattern. You can download it or try the same steps on your own recording.

ListenSetupTry the settingsTroubleshooting

Synth keys · 92 BPM

Hear the difference

Listen to the body of each note. Low adds an edge to the clean keys. High brings out more upper harmonics and a rougher tone.

Selected: Dry. Press Play to listen.

Mode
Pro
Starting preset
Golden Glow
Tube
12AX7

Original synthesized audio, rendered offline with TubeSound's DSP. Playback loudness is matched. High is deliberately driven harder to make the change easier to hear.

Dry MP3 · Low MP3 · High MP3. Use the WAV to try these settings in your host.

Add TubeSound to a track

Install TubeSound from the App Store and open the app once. Open GarageBand and select a track that already plays audio. TubeSound is an effect, so it needs an instrument or recording ahead of it.

On iPhone or iPad

  1. Open Track Controls, then Plug-ins & EQ.
  2. Tap Edit, then the add button in an empty effect slot.
  3. Choose Audio Unit Extensions, then TubeSound.
  4. Tap TubeSound in the effects list to open its controls.

Use an effect slot on the track. The External instrument browser is for Audio Unit instruments.

On Mac

  1. Select the track and open Smart Controls.
  2. Expand the Plug-ins area and click an empty effect slot.
  3. Find TubeSound in the Audio Units submenu and open it.

If Audio Units are disabled, enable them in GarageBand's Audio/MIDI settings, then reopen the project.

Try the keyboard example

  1. Import the source WAV into an audio track and loop a few bars.
  2. Open TubeSound, choose Pro mode and load Golden Glow.
  3. For Low, set Input to 0.65. Keep the other circuit controls at the preset values.
  4. Use Output to match the listening level to bypass.
  5. For High, raise Input to 2.00 and match Output again. Compare the sound during each note, then listen with the rest of the song.

The source WAV has the same input level used for these clips. A different recording level will change the amount of saturation.

Choose the amount in the song

Solo the keys long enough to hear the difference, then bring the other tracks back. A setting that sounds rough on its own may work behind a vocal. If the keys start masking the vocal, lower Input before changing the rest of the circuit.

Put TubeSound before a reverb when you want the reverb to follow the saturated sound. Put it after a reverb if you want to process the reverb tail as well. Try one order at a time.

If TubeSound is missing or silent

Check the audio-effects list, open the installed TubeSound app once and restart GarageBand. On Mac, check that Audio Units are enabled. If the effect opens but you hear nothing, bypass it and confirm that the selected track plays without it.

The free trial has periodic silent breaks. Those breaks are separate from the drive setting. If you have already bought TubeSound, use Restore Purchases in the app with the Apple Account used for the purchase.

Host documentation

Other host guides

For the circuit controls, see the TubeSound Pro Guide.

Try it on your own track

TubeSound is free to try. The trial has periodic silent breaks. A one-time in-app purchase removes them. Use Restore Purchases if you have already bought the app.

Try TubeSound on the App Store